I recently acquired a Map KF-M1 camera. Made by Phenix in China using a Yashica FX-3 chassis, it has a Nikon lens mount and a top shutter speed of 1/4000 sec. It's the same camera as the Kenko KF-2N which was clearly an attempt to create a camera with the same specification as the Nikon FM-2n. The Map version was made exclusively for Map Camera in Japan and, unusually, has no branding on it. There was another version called the Phenix DN66 sold in the Chinese domestic market.
I was intrigued how the top shutter speed was achieved. The Nikon FM-2n uses the same Copal shutter as the Contax S2 and I knew that shutter will not physically fit into a Yashica FX-3 chassis - I've tried it. The shutter is larger and has slightly different mounting positions. So, to find out how it was done, I had to get a camera. All the variants are rare and, if you do find one, expensive. But I found a KF-M1 in China. The seller accepted an offer but it still cost me nearly £190 with the import tax paid.
With the camera dismantled, first inspection of the shutter suggested it was the same shutter as is fitted to the Yashica Super 2000 (and many other cameras) but it has an extra position on the shutter speed selector. A check of the shutter speeds shows it is struggling to get to 1/4000 and the general shape of the test results graph is very similar to that from a Yashica Super 2000.
It's not unusual for the Yashica Super 2000 shutter to be slow at the top speed but some adjustment will usually bring it into specification. I'll have to see if I can get the KF-M1 shutter closer to what it should be.
So it appears Copal produced a further upgrade to the 2000 shutter, which was itself an upgrade of the original 1000 shutter as used in the original FX-3. So I'm surprised that a Yashica Super 4000 never appeared if the shutter was available and could be fitted with no modification to the existing FX-3 chassis. Maybe it was because it would be competing with the Contax S2.
Now I need to decide what to do with the dismantled KF-M1. I don't want a camera with a Nikon lens mount. I could fit the shutter into an existing FX-3 Super 2000 or I could fit a Yashica lens mount to the KF-M1. The camera is quite well made and, unlike the Yashica with plastic top and bottom plates, the KF-M1 has metal top and bottom. The focus screen is the original Yashica one with the diagonal split prism, which I don't like, but if I change the lens mount I'll also have to change the viewfinder so that's not an issue. Whatever I do, the camera is unlikely to get a lot of use from me so if someone out there has an urge to own a Yashica Super 4000, get in touch and we can discuss.
Update: There is now a part 2 to this post at https://contax139.blogspot.com/2021/02/yashica-fx-3-super-4000-part-ii.html
